Synopsis:  As mobile operators look to improve coverage and capacity while getting more from existing infrastructure, antenna performance is becoming increasingly important. For CellMax, that means finding ways to make a fundamental part of the mobile network work harder and more efficiently.

When we think about the future of mobile networks, it’s usually the most visible technologies that get the attention. Artificial intelligence, cloud computing, advanced software and 5G all feature heavily in conversations about how connectivity will evolve.

But there’s another part of the network that’s just as important, even if it receives far less attention.

The humble passive antenna.

Every phone call, video stream, industrial IoT connection and 5G data session depends on radio signals travelling efficiently between the network and the user. The quality of that connection is shaped by the physical infrastructure carrying those signals, and the antenna sits right at the heart of it.

For CellMax Technologies, that’s been the focus for more than 25 years.

The Swedish technology company has built its reputation by challenging conventional approaches to passive base station antenna design. Its aim is straightforward: make antennas work harder and more efficiently, helping mobile operators get more from the infrastructure they already have.

Today, CellMax supplies antenna solutions to major mobile operators around the world, with North America representing its largest and most strategically important market.

Making every part of the signal count

The starting point for CellMax is a deceptively simple engineering principle: reduce the losses that occur between the radio and the point where the signal is transmitted.

Traditional base station antennas can contain a network of internal coaxial cables, connectors, solder joints and electrical transition points. Each one can introduce some degree of loss or inefficiency. Over a large network, those small losses can add up.

CellMax took a different approach.

Its antenna architecture uses highly integrated conductive structures and precision-engineered passive components to minimise unnecessary transition points and create a more efficient signal path from radio input to radiated output.

The company says its antenna systems regularly achieve radiation efficiencies of more than 90%, with some designs reaching as high as 96%.

That matters because antenna efficiency isn’t simply an engineering statistic. It can have a direct effect on the way a network performs.

CellMax antennas typically deliver 2 to 3 dB higher gain, while even a 1 dB improvement can make a meaningful difference to coverage and capacity. For an operator running thousands of sites, improvements at individual antennas can translate into significant gains across the network.

Better coverage can mean fewer sites are required. Improved cell-edge performance can help maintain higher data speeds further from the base station. Greater efficiency can also contribute to lower energy consumption.

In other words, getting more from the antenna can help operators get more from the entire network.

Why antennas still matter in the 5G era

It might be tempting to assume that as mobile technology becomes more sophisticated, passive antennas will become less important.

The opposite is true.

Modern networks are having to support several frequency bands at the same time. These can include low bands for broad coverage, mid bands for a balance between coverage and capacity, and upper mid bands that provide the higher capacity associated with many 5G services.

The challenge is that radio waves behave differently at different frequencies.

Higher frequencies generally experience greater path loss, which means they don’t travel as effectively as lower-frequency signals. That creates a particular challenge for operators using upper midband spectrum for 5G. The capacity is there, but making that capacity available over a useful area requires careful network engineering.

This is where passive antenna design becomes particularly important.

CellMax believes that better antenna performance can help operators extend the reach of higher-capacity spectrum without simply adding more radios, increasing transmit power or building additional infrastructure.

One of the company’s key innovations in this area is VERA.

VERA tackles a hidden multiband problem

Modern base stations often carry several frequency bands through a single antenna. In an ideal world, each band would provide coverage over the same area.

In reality, things are more complicated.

Different frequencies produce different beam characteristics and vertical radiation patterns. As a result, the point at which coverage falls away can vary between bands.

This is particularly relevant at the upper -3 dB point in the vertical pattern, where radiated power has fallen by 3 dB from its peak gain.

The practical consequence is easy to understand. A user may still have a connection to the network, but the higher-capacity spectrum they could otherwise be using may no longer reach them effectively.

Lower-frequency bands can continue to provide coverage further into the cell, while upper midband coverage drops away sooner.

VERA is designed to address this mismatch.

The technology automatically aligns the upper -3 dB coverage points across multiple frequency bands, creating more consistent vertical beam performance across the antenna’s operating spectrum.

That can allow lower and upper midbands to cover substantially the same geographical area.

The potential impact is considerable. If upper midband coverage radius is extended by 20%, the usable coverage area can increase by approximately 44%, depending on deployment conditions.

Importantly, this can be achieved through passive antenna optimisation rather than additional spectrum, radios or transmit power.

For operators, that’s an attractive proposition: more usable 5G capacity from infrastructure they already have.

Smaller antennas, without sacrificing performance

Network operators are also facing another practical challenge. Radio infrastructure has to become more capable while fitting into increasingly constrained physical environments.

That puts pressure on antenna manufacturers to deliver equipment that’s smaller, lighter and easier to install, while still supporting more frequency bands and greater capacity.

Historically, reducing the size of an antenna could mean accepting compromises in performance.

CellMax has been working to challenge that assumption.

Through collaboration with KTH Royal Institute of Technology, the company has explored compact multiband antenna designs capable of delivering high levels of efficiency. Research developed through the collaboration has demonstrated prototypes achieving approximately 96% efficiency in lower bands and more than 93% in higher bands.

The implications go beyond the antenna itself.

Smaller and lighter equipment can be easier to deploy and can reduce wind loading on infrastructure. For operators managing large numbers of sites, those practical considerations can become just as important as headline performance figures.

Keeping engineering close to home

One of CellMax’s distinctive characteristics is the degree of control it maintains over its development and manufacturing processes.

Antenna design, simulation and product development are carried out in-house at the company’s headquarters in Kista, Sweden, a location with a long-established connection to telecommunications innovation.

That gives CellMax direct control over the engineering process, from electromagnetic modelling through to final product optimisation.

The same philosophy extends into manufacturing.

CellMax operates its primary production facility in Sweden, alongside a smaller production site in the United States supporting key regional demand. The company says that well into the upper 90% range of its components are produced in Sweden.

That level of control is particularly relevant in antenna manufacturing, where precision matters.

Small mechanical variations can affect gain, beam shape, sidelobes and the alignment between frequency bands. Maintaining close control over manufacturing therefore helps ensure that the finished antenna performs as intended.

For customers deploying infrastructure on a large scale, consistency matters just as much as innovation.

Innovation with a practical purpose

There’s a temptation in the telecommunications industry to focus on the newest technology and the biggest numbers.

CellMax’s approach is somewhat different.

Its focus is on a part of the network that’s easy to overlook, but which ultimately determines how effectively radio energy reaches the people and devices relying on it.

That makes antenna engineering a practical discipline. It’s about finding ways to improve coverage, capacity, efficiency and reliability while working within the very real constraints faced by network operators.

The company’s work with KTH, its investment in in-house engineering and manufacturing, and technologies such as VERA all reflect that philosophy.

The goal isn’t innovation for its own sake. It’s to solve problems that operators are already facing.

Looking ahead

The next generation of mobile networks will place even greater demands on physical infrastructure.

Networks are becoming denser. More frequency bands are being deployed. Higher frequencies are being used to deliver greater capacity, while operators are under constant pressure to improve efficiency and control costs.

Against that backdrop, passive antennas remain an essential part of the equation.

CellMax has spent more than a quarter of a century exploring what’s possible when antenna design is treated as a critical part of overall network performance rather than simply another component in the radio system.

Its proposition is ultimately a practical one.

If operators can achieve better coverage, greater usable capacity and improved efficiency from existing network assets, they may not always need to build more infrastructure to meet growing demand.

That’s an increasingly valuable idea in a telecommunications industry where performance expectations continue to rise, but resources, energy and physical space remain finite.

For CellMax, the future of mobile connectivity isn’t only about making networks smarter.

It’s also about making the physical foundations of those networks work better.